Battery To Starter Cable With Terminals And Terminal Covers

Precautions for removing the car battery starting cable

1. Do not disconnect the battery cable before reading the fault code

After the power is turned off, the fault code of the control unit will be automatically eliminated, which will affect your judgment of the fault. Therefore, the current fault code must be recorded before the power failure, and then consider the power failure.

2. Do not disconnect the battery cable when the ignition switch is in the ON state

Sudden disconnection of the battery cable will cause the coil in the circuit to generate self-inductive electromotive force, which will easily damage the computer board or sensor.

3. The fault code cannot be cleared by removing the battery cable at will.

For some engines, disconnecting the battery cable can clear the currently stored fault codes, but for some engines, after disconnecting the battery, the anti-theft and navigation will be locked. So it can't be cut off at will.

4. When replacing the battery, first disconnect the negative electrode, then disconnect the positive electrode, and install it in the opposite way.

Because cars are all negative ground, negative ground can prevent electromagnetic interference. When a power outage is required during vehicle maintenance, as long as the battery negative stage is removed, it is not easy to cause a short circuit.

5. When installing the battery positive and negative cables, be sure to install them in place and tighten them with standard torque.

Re-maintenance must be careful and careful, and every link must be done in one step to prevent excessive failures and cause customer complaints.

Product parameters:

Nanpi Haoxinyuan Technology Co., Ltd. was established in 2018. We focus on metallic parts OEM and do contract part fabrications to our customers.Our company is located in cangzhou city, hebei Province.Haoxinyuan pay much attention on our product process control and process management. Our company is TS16949 certified.

Haoxinyuan has a professional and experienced working team dedicated to metal parts fabrications. Our strengths and specialties is Processing and production of metal stamping parts, and we provides a one-stop service, including mold production, stamping production, surface treatment and assembly.

Our products sell well in Africa, Middle East, Southeast Asia, Europe, North America and other places. Anyone who works with us is proud of our good after sales service and open attitude.