OEM Custom Copper Busbar Jumper Bar Metal Stamping Part

Definition of copper busbar: Copper busbar, also known as copper busbar, is a hard busbar. Copper busbars are used as current-transmitting copper bars. Copper busbars have good electrical conductivity, thermal conductivity, corrosion resistance, high mechanical strength, no low temperature brittleness, easy welding, and easy pressure processing.

Copper busbar welding points:

1. The allowable ambient temperature of the copper busbar welding site is above 5 °C;

2. The protective gas is argon;

3. Select HS201 pure copper wire for copper busbar welding wire, add gas welding flux CJ301, mix CJ301 into a paste with absolute ethanol (alcohol) before welding, and then brush it on the groove surface of the weldment;

4. Heat the welding wire and stick to CJ301 before welding;

5. Selection of welding process parameters, manual tungsten argon arc welding adopts DC positive polarity;

6. The electric welding machine should have good performance, flexible current adjustment and easy operation;

7. The preheating method of copper busbar adopts electric heating and flame heating;

8. Preheat temperature selection, thickness δ

9. Welding under restraint conditions should be avoided as much as possible, the interlayer temperature in the welding process should be strictly controlled, and the welding should be performed with a small swing and small line energy;

10. The welding seam shall be spot-fixed, the length shall not be less than 10mm, the number of spot-fixing shall be evenly distributed, and the number of spot-fixing shall not be less than 3;

11. Multi-layer multi-pass welding process should be used for welding with thickness δ>4mm;

12. The black spots caused by the high temperature during welding should be cleaned up in time, and the cleaning between layers should be carried out with stainless steel wire brushes;

13. The quality of spot welding should be checked in time before welding, and welding can be carried out only after the inspection confirms that there is no defect;

14. Strengthen the intermediate inspection process, such as: after tack welding, between the weld layers and after all welding, all must be inspected, and strictly follow the welding process requirements to ensure the welding quality of copper busbars.

Product parameters

Nanpi Haoxinyuan Technology Co., Ltd. was established in 2018. We focus on metallic parts OEM and do contract part fabrications to our customers.Our company is located in cangzhou city, hebei Province.Haoxinyuan pay much attention on our product process control and process management. Our company is TS16949 certified.

Haoxinyuan has a professional and experienced working team dedicated to metal parts fabrications. Our strengths and specialties is Processing and production of metal stamping parts, and we provides a one-stop service, including mold production, stamping production, surface treatment and assembly.

Our products sell well in Africa, Middle East, Southeast Asia, Europe, North America and other places. Anyone who works with us is proud of our good after sales service and open attitude.